Skip to main content

Euro Scale Modelling 2007

Continuing with the uploading of older pictures I present the pictures I took at the annual event of the IPMS Netherlands.

On Saturday November the 24th (2007) Euro Scale Modelling was once again held at the NBC convention centre in Nieuwegein.
The amount and quality of models on show was really nice and I was able to take quite a few pictures.

Below is a small selection of the pictures I took at the event.


More pictures can be found here.

Comments

Popular posts from this blog

Citroën Xsara WRC - Francois Duval, ADAC Rallye Deutschland 2007 (part 2)

As promised, only a few days since the first part, here's the second part of this build. Once in a while I tend to keep a promise... As mentioned in the previous part I have been studying the manual to figure out what needs to be modified for this build. A few things were already shown in the previous part. Here I will discuss the other modifications I'm planning. This will be a nice exercise for when I'm going to build Gigi Galli's slightly beaten Xsara WRC from rally Portugal 2007... Renaissance transkit 24/96 contains a PE sheet with mesh sections for the vents in the hood and the main grille in the front bumper. Renaissance tells you to glue the mesh over the appropriate sections of the body. But I'm intending to remove the plastic and create some sort of box under/behind the openings to suggest depth. The body needs some parts removed and filled. The molded quick-release bonnet and boot pins need to be removed as they will be replaced with PE items. The holes

Citroën Xsara WRC - Francois Duval, ADAC Rallye Deutschland 2007 (part 1)

And off we go on another project. When modelling WRC subjects, you cannot ignore the Citroën Xsara WRC as it is some kind of legend. Especially in the hands of a certain French driver. That's why I have 3 Xsara kits in my stash. None of said driver, that is. But rest assured, he is also present in my WRC collection. With this particular build I'm going to build the car that Francois Duval drove so expertly to the runner-up spot in the 2007 ADAC Rallye Deutschland. Sadly, where the Citroën Xsara WRC is a bit of a legend, the same thing can not be said of the only injection moulded kit if the same car... As said, there's not much choice, as Heller is the only kit manufacturer for this car (although the same kit has also been released by Airfix and Italeri). For this build I'll be using Heller kit no. 80769. Let's just say,it's not a Tamiya kit... By far. For several reasons I chose this particular car because I like the livery and I like Francois Duval too beca

Citroën Xsara WRC - Francois Duval, ADAC Rallye Deutschland 2007 (part 5)

As promised in the previous part in this update I'll show what I changed on the roll cage. The roll cage as included in the kit is far from complete. When looking at on-board footage and reference images found on the internet the roll cage needs some extra tubing added.  Over the years the roll cage of the Xsara WRC has had several variants as I've noticed studying my reference images. Which isn't that strange as the crash test and safety regulations have changed over the years.  The reference images I have of the specific chassis (#28) which Duval raced during the 2007 ADAC Rallye Deutschland are sadly inconclusive about which version of the roll cage was fitted. Which means that the adaptations I made are at best a good "guesstimate"... As long as it looks and feels right, it is right I guess... I used Evergreen styrene rod of 1.6 mm in diameter for the added sections for the rollcage.  The added sections are highlighted in the images below. Another section I&#