Skip to main content

Posts

Interscale Stolberg 2015 - modelling event

On Saturday 21 and Sunday 22 February of 2015 the modelling event "Interscale Stolberg" took place in the small town of Stolberg near Aachen in Germany. As it is only an hours drive from where I live, I decided to visit this event which was held for the first time this year. Modelling events in the near vicinity (Southeast part of the Netherlands) are few and far between, so this was a great opportunity for me. The event was held in the "Zinkhütter Hof", a small museum dedicated to the mining activities that once were a major source of income and work in the region. As this was the first time, the event was rather small. But that didn't take anything away from the quality on offer. All kinds of modelling were present; military, civil, sci-fi, etc. There was also a big group of paper/card modellers. The event was spread over 2 days. My visit was on Sunday morning. Although it wasn't crowded, people kept coming in to check out the models on show. ...

Corvette C5-R Compuware (part 7)

I've been working on some smaller parts lately. Don't feel very inclined to continue working on the body, although I'm nearing the point where I will have to pick that up again. Apart from the smaller parts, I've also been doing some work on the floor. Before I painted the floor, I made a few templates for CF decals. Revell provides a CF decal for the upper (and most visible) side of the diffusor, but omitted the CF decals for the bottom of the diffusor. Checking my reference images I noticed that the underside also has a carbon-fibre pattern. So out came my Scale Motorsport CF decal collection. I chose decal 1020 from Scale Motorsport for this. The pattern resembles the pattern of the Revell decal the most. I only noticed that the SMS is a lot brighter so I will need to tone it down a bit. In the meantime I also finished the extra piece of rollcage with the headrest. For the headrest-panel I also used SMS CF decal. But this time I opted for 1424. I g...

Corvette C5-R Compuware (part 6)

Finally several parts have received some colour. First parts with colour were the wheels. According to the instructions from Revell the wheels should be painted aluminium. The Revell (and Tamiya) aluminium colour was a bit too light to my taste when compared to the colour in the reference images. So I opted for Alclad 101 Aluminium over grey primer (Tamiya Fine Surface Primer). I also drilled a hole in each wheel and inserted a piece of 0.8 mm wire to simulate the tire valve. I already put the tires on the wheels. All I need to do now is put some tire decals on and give the wheels a light weathering. As there are no tire decals present on the kit decalsheet (shame on you Good Year) I bought some aftermarket decals. As I was on a roll, I also painted the exhausts. According to the instructions they should be painted chrome silver. I suppose that's correct for the end pipes, but I'm not so sure about the first part of the exhaust connected to the engine. But a...

Avro Lancaster B Mk. I ME858 JI-J (teaser)

With this post I'd like to introduce my newest project. This time it'll be a break from the usual 4-wheeled subjects I build. I started my modelling "career" building 1/72 planes from Matchbox, mainly. I built everything from jets to props. My interest in planes never has faded although I haven't build a plane in a long time. My enthousiam got rekindled when my father (with several other people) started working on a book depicting the history of the former municipality of Hunsel (in the South of the Netherlands) during World War 2. One of the chapters in the book concerned the crash of a Lancaster bomber during the summer of 1944 near the house of my parents. My intention is to build this plane in a rather dramatic setting: Just after it had been shot, with the port engines on fire. The kit I'm going to use will be the Tamiya 1/48 model of the Avro Lancaster B Mk. I (kit no. 61112). Some 20 years ago I already build this kit (OOB) for a small exhibi...

Corvette C5-R Compuware (part 5)

First post of 2015. A happy new year to my readers! As I pointed out in the previous post of this build, the wheels sit too deep into the wheel wells. With Evergreen profiles I made the suspension parts wider, so the wheels don't sit so deep anymore. I forgot to take a picture of the final testfit, but I did make a picture of the adapted suspension elements. Next I continued work on the interior of the car. According to my reference images, several parts were missing in the Revell kit. The most obvious part missing in my eyes was the piece of rollcage directly behind the driver's seat. I constructed the additional piece of rollcage with Evergreen profile and sheet. I also made the driver's head rest from evergreen sheet (the white part on top of the roll cage) Now it is possible to attach the seat belts to the roll cage. But to make this possible I had the adapt the driver's seat. The seat included in the kit differed quite from the seat in the refere...

Corvette C5-R Compuware (part 4)

The build of the Corvette is coming along slowly but steadily. After all the work on the body everything had to be smoothed. This was done with putty, sandpaper and sanding sticks in different grades. At the moment most of the sanding work is finished and the model is almost ready for primer. Here's as few pictures of the current state of the build: In the meantime I managed to prepare all the small(er) parts primer/paint. Only a small section of the parts is visible in the picture below. As I've decided to glue the body to the floor, I won't be spending a lot of time on the engine, suspension and other internals. I will paint them and might try a few weathering tricks on the parts, but won't be detailing the parts. It will stay OOB. For the cockpit I'm planning to go a bit further because it is a very visible area and I've found several useful reference images. Sadly I had to conclude that Revell has left out several details for this specific ver...

Jaguar Mk. II Saloon "Inspector Morse" (part 10)

This build has also been a victim of being left to rest for a few years. Apart from that it has also become a victim of sloppy storing by myself because when I picked this one up to finally continu this build I noticed that the hood was damaged. There was only one solution: Sand the paint down and paint the hood again. As I had to paint the hood I decided to also sand down the damaged spots on the trunk so I could repaint these spots along with the hood. Luckily I still had some of the custom paint mix leftover. Just enough for a few thin layers of respraying. The picture below was taken after the first layer. Taking a closer look at the wheels I just couldn't ignore the paintless spots on the hubcaps where the sprue attachment points had been. I tried to paint them with a bit of Alclad chrome. But the difference was very visible to me, so I decided to remove the hubcaps, strip them of their chrome layer and repaint them with Alclad chrome. They just need t...